Model Number: RPP-47 Extractor Rosin Pressing Plates
Product Name: Rosin Press Plate
Pressing Table Size: 173*102mm(4*7inch)
Usage: Wax; Concentrates Oil
Temp Range: 0~999F
Max Pressure: 20 Tons
LTQ Vapor RPP-47 Anodized Uncaged Press Plate Kits with 4 Pcs Rod Heaters, Dual Temp Sensors, Temperature Control Box – Pair it With 20-Ton H Frame Hydraulic Press
•Alignment & Safety – Newer Version RPP-47 Allows the Bottom Platen to Secure on the Hydraulic Press to Align Both Platens for Safety During Pressing.
•Innovative 10mm Slim Insulator – Allows Machine to Reach a Temperature of 225F in 4-5 Minutes While Protecting the Hydraulics from Overheating.
•4″X7″ Heat Press Plates – Well Suited to Large Batches Pressing for Industrial Use; Pairs Well With a 20 Ton Hydraulic Shop Press.
•Food-grade Heated Platens – Made of Anodized 6061 Aluminium; Easy to Clean and Best Flavour Guaranteed.
•1,000 Watts with 4Pcs Heating Rods – Quick Heating Up to Set Temperature; Evenly, and Accurate Temperature Delivered Utilising Separated Thermocouple and Heating Rods.
——-Instructions to Secure Bottom Platen to Hydraulic Press Frame:
Install the top heated plates onto the ram of the hydraulic press.
Install the bottom heated plate using the long threaded rod through the bamboo insulation, then attached to the worktable plate.
Lower the ram on the hydraulic press just until both plates touch.
Adjust the position of the plates if necessary, so they are aligned.
Ensure bamboo plank is aligned under the bottom plate.
Tighten the nut on the long threaded rod to secure it to the worktable plate below.
——PID Temp Controller Setting:
Press “SET” button to activate temperature controller
Press ◄ button to increase and decrease the value at hundreds, tens and one’s places
Press ▼ or ▲ from 0-9 for your desired temp
Press “SET” button to lock the desired temperature in place
Posting your seller rating below will assist other buyers, and maintain a high standard amongst our members.